Electronics

2-Channel Digital-to-Analog Audio Converter, with AES pass-through and balanced audio outputs.

 

Featuring:

* Single board in a box.  Box dimensions 6.50L x 3.50D x 1.66H

* RJ45 input connector AES channels 1-8

* RJ45 pass-through output connector for AES channels 1-6 (AES pairs 1-3).

* Converted analog outputs on a pluggable "Phoenix" connector. 

* Balanced analog audio outputs, with gain control for each channel.

* Rack-mount panel available. 

New!

Scroll through images above, click on image to enlarge

8-Channel Digital-to-Analog Audio Converter

 

This Cinema digital-to-analog converter is easy to install, and easy to integrate with modern IMB and IMS servers as well as with older "Legacy" servers.

Using Odyssey's proven system of HI/VI routing, the 4XD2A features all the necessary breakouts and processing of the Hearing Impaired and Visual Narration tracks.

 

1/2

New!

Scroll through images above, click on image to enlarge
 

8 Channel Booth Monitor

 

Economical 7.1 Audio Booth Sound Monitor.  Accepts processor output signals and passive, bi-amped or tri-amped amplifier output returns. 

 

Ships with input terminal boards and universal voltage plug-in supply.  Processor input boards available with "THX" or "TASCAM" inputs.

 

*Can be upgraded to a "data-port" style monitor with our TM-HDBM I/O module.
 

1/2
Scroll through images above, click on image to enlarge

Booth Monitor with HD15 "Dataport" connectors.

 

This TM booth monitor features an add-on module that provides HD15 outputs, for direct connection to "Data Port" inputs found on modern amplifiers.

 

On board switches provide options for external crossover input and parallel surround outputs.

 

All Odyssey booth monitors designed to not interfere with processor signals to the amplifiers, even if the unit is turned off. 

1/2
Scroll through images above, click on image to enlarge

Bi-Amped/Tri-Amped Monitoring

 

This TM booth monitor features our add-on backboard module that allows for passive, bi-amped or tri-amped channels from the processor, as well as from the amplifier outputs.

 

It also features pluggable connectors arranged to provide clean wiring to and from the amplifiers.

 

All Odyssey booth monitors designed to not interfere with processor signals to the amplifiers, even if the unit is turned off. 

1/2
Scroll through images above, click on image to enlarge

32 Channel Booth Monitor

 

Extended Surround Monitor Switch for use with modern multi-surround "immersive sound" systems.

Monitors 32 channels of audio and selects one at a time to be sent to a external speaker, such as the Odyssey DTM-V (or any other booth monitor).

 

Input adapter boards are available with both "THX and "TASM/CP850" pinout.
 

1/2
Scroll through images above, click on image to enlarge

Single Channel Booth Monitor

With Analog Input

 

Easy to install, easy to operate.  Single RCA connector for line level analog input.

Digital volume control and mute buttons.

Can be used with the CP850's "Monitor" output.

1/2
Scroll through images above, click on image to enlarge

Single Channel Booth Sound Monitor, with Digital Input, and AES Pass-through and Breakouts 

This monitor is optimized for use with the IMS-3000 AUX AES port.  An extra RCA connector provides non-cinema digital input.

 

This unit internally converts a digital AES pair for the monitor speaker.

 

It also breaks out the other AES pairs from the AUX AES port to RCA connectors, for use with external A-to-D’s and D-to-A's

 

Features include:

* Input and Output RJ45’s for AES audio

* Input and Output RCA’s for AES breakout

* Level control for the internal monitor level gain

Scroll through images above, click on image to enlarge

A versatile and affordable answer to the demanding requirements of today's digital motion picture soundtracks. These crossovers make an excellent companion to modern two- and three- way speaker technology.

Each crossover is speaker-specific, tailored to the speakers used in the sound system. Crossover points, time alignments and other equalization in the VF circuitry saves time when tuning the auditoriums. 

The VF306 is a bi-amped, three channel crossover.

The VF309 is a tri-amped, three channel crossover.  

1/2
Scroll through images above, click on image to enlarge
 
 
 
 

The DI6-3 Drive-In Mixer passively sums the 6-channel outputs of modern D-to-A converters and provides a stereo output suitable for drive-in theatre sound systems.  An extra mono output can be used to feed lobby sound systems.

The base model ships with a rack-mount front panel and no I/O cables.

We offer the mixer in bundled kits, with cables optimized for different cinema processors and D-to-A's:

 

Each kit contains the following:

* The DI6-3 Passive Drive In Mixer.

* A 3-foot input feed cable, optimized for use with various processors or Digital-to-Analog converters.

* A 3-foot stereo RCA cable, to connect the output of the DI6-3 to the input of an FM transmitter.

NOTE:  The kits do NOT include the rack-mount front-panel, which is available for separate purchase.

DI6-3-KIT/ECI     Mixer, with bundled I/O cables optimized for D-to-A’s with the “DAX/ECI-60/DMA8” analog output.

For most D-to-A converters (DAX-602, ECI-60, DMA8, Odyssey 4XD2A, and others with the “ECI-60/DMA8” output pinout).

 

DI6-3-KIT/THX    Mixer, with bundled I/O cables optimized for processors with "THX" DB25 outputs.

For most cinema processors (CP650, CP750, JSD-80, JSD-100 and others with an Odyssey DB25 "THX" output board).

 

DI6-3-KIT/DPM    Mixer, with bundled I/O cables optimized for processors with multiple HD15 outputs.

For processors with HD15 “Data Port” outputs.   NOTE: The processor must be configured for Full-range/Passive output.   

 

DI6-3-KIT/DRM   Mixer, with bundled I/O cables optimized for the Doremi AUD-D2A analog output.  

 

DI6-3-KIT/TAS    Mixer, with bundled I/O cables optimized for the CP950 (and devices with the “TASCAM” analog pinout).

 

DI6-3-KIT/CP500  Mixer, with bundled I/O cables optimized for CP500 processors.

 

Other kits are available for other “legacy” cinema processors, with the appropriate cable to connect the processor to the mixer input.

Sold Separately:

  • DI-FrontPanel    1-RU panel with hardware for DI6-3 rack mounting

 

Also available: 

  • Output DB25 boards for older CP's such as the CP55, CP65 and USL-JS series card-cage processors.  

These convert the old-style screw-terminal outputs of the older CP's to "THX" DB25 output connectors for cleaner/quicker hookup.

Scroll through images above, click on image to enlarge

During this COVID-19 Crisis:

We at Odyssey are doing our part to adjust how we do business, and keep our community safe and healthy.  Like most of the country, we are under stay-at-home orders until the end of April.  Please be patient, as we have a limited crew in place.  We can ship urgent orders, and some non-urgent ones, but it may take a little longer than usual. When placing orders, please confirm via email that someone will be available to receive the package. If there is an urgent need, feel free to send the order and we will let you know if we can ship, or the expected time frame for shipment.

We hope you all stay safe!

  • Black Facebook Icon
  • Black Twitter Icon

© 2020 Odyssey Products